In this step, you will:
-Register your Smart Badge to your previously created TPC account
Step 3 - Register Smart Badge to TPC
To enable the Smart Badge to connect to the TPC network and transmit location data, it’s necessary to register the Smart Badge under your TPC account.
1
Please select Create under the Devices tab.
2
Select Abeeway as the device manufacturer.
3
Select Smart Badge from the drop-down list.
4
Select your ISM Band from the drop-down list.
5
Give your device a name that is meaningful to you.
6
Enter the DevEUI, which is shown on your device documentation. You can verify the DevEUI from the Label on the Smart Badge.
7
Select Over-the-Air Activation from the drop-down list.
8
Enter the JoinEUI and AppKey, which are shown on your device documentation.
9
Select the connection that you created at Step 2 from the drop-down list.
10
Click CREATE to create the device definitions on your TPC account.
11
If you see INITIALIZATION Â in the status area, it means that you successfully created the device, but TPC did not receive a message from the device.