Senlab D Indoor - Digital On/Off monitoring & alerting - TOR-LAB-41NS
This smart LoRaWAN™ communicating device called Senlab D has a digital input for ‘on/off’ or ‘close/open’ state detection. Therefore, Senlab D is capable of detecting the status of relays, transistors, or switches. Senlab D can either operate in counting mode or alerting mode:
- In counting mode, you will receive periodically the number of transitions the device monitored
- In alerting mode, you will receive a radio message each time the Senlab D detects a change of state
- Smart Agriculture
- Smart Industry
- Smart City
- Smart Energy & Utilities
- Smart Health
- Door opening detection for Cabinet & Substations
- On/Off binary output actuators
- Open/close binary input sensor
- LoRa Alliance Certified
- Up to 10 years of battery life
- Easily replaceable battery
- Up to 15km of range
- Datalogging (24 points / radio transmissions)
- Smart "Alert + Acknowledgment" system
- Battery level feedback on each data communications
- Easy to install (magnet activation, LED feedback)
- Cloud codecs enabled
- Application reconfiguration Over The Air (measurement frequency for monitoring mode,...)
Senlab D will enhance your security or preventive maintenance efforts.
The connector and its counterpart will allow you to quickly and easily link the Senlab to the sensor or relay to suit your application.
The small form factor and discreet aesthetics of the Senlab D make it well suited for offices or accommodations fitting. Sensing Labs devices are engineered with very particular attention to the custom antenna design, bringing best-of-class performances to Senlab devices, both on the range and battery life.
The battery is replaceable. Ready to be used on an LPWA Actility Network. All our devices are delivered with configuration. We will provide you with a CSV. file with commissioning keys.
ThingPark Connected devices have been extensively tested through LoRaWAN use cases and application integration to confirm interoperability in networks powered by Actility’s network server and management software. ThingPark has been selected by market leaders such as Orange, Proximus, Swisscom, Cisco, Inmarsat, KPN, and more. Learn more here: https://partners.thingpark.com
| Partner Name | SENSING LABS |
|---|---|
| Vendor | Sensing Labs |
| Certification | CE, RoHS, LoRaWAN Certified |
| Power supply | Non rechargeable battery |
| RF power (dBm) | +14dB |
| Battery type | Lithium ion |
| Output throughput (mW) | 25mW |
| Antenna | Integrated |
| RF transceiver | SX1272 |
| Interfaces | Numerique |
| Operating Temperature (min to max) | 0°C to 55°C |
| Band LoRaWAN MHZ | EU868 - Europe 863-870MHz |
| Depth (cm) | 8.5 |
| Height (cm) | 5.3 |
| Width (cm) | 2.5 |
| Commercial status | Commercially available |
| Is available for sale | Yes |
Sensing Labs AD
Sensing Labs offers long-range and low power wireless sensors. It addresses B2B markets in the energy efficiency sector: connected buildings, smart energy metering (water, gas, electricity), irrigation control, predictive maintenance...
Senlab sensors combine hardware, software and firmware. The integration of sensors on IoT platforms is easy and fast.
SENLAB's LoRaWAN communicating sensors offer an optimal solution for data retrieval in a variety of environmental conditions (internal, external or harsh). SENLAB sensors are compatible with all public or private LoRaWAN networks. Sensing Labs' tools and services make it easy to use and configure the sensors.
IoT devices designed by Sensing Labs:
- Senlab M (gas and water),
- Senlab Led (electricity), Senlab T (temperature),
- Senlab A (4-20 Ma),
- Senlab PIR (Passage or Presence Detector),
- Senlab T & H (temperature and humidity),
- Senlab D (all or nothing),
- Gateways (Senlab Pico Gateway or Multitech)
All sensors have a range of 15 km of free field and a life span of up to 20 years with a communication every 10 minutes including the last 24 acquired data.