Sensing Labs - Senlab T LoRaWAN Indoor Temperature Sensor TEM-LAB-41NS EU868
The Senlab T LoRaWAN Indoor Temperature Sensor remotely reads the temperature in the following fields of application: smart buildings. This sensor is extremely accurate (±0.2ºC) and is suited to indoor uses.
- LoRa Alliance Certified
- Up to 10 years of battery life
- Easily replaceable battery
- Up to 15km of range
- Datalogging (24 points / radio transmissions)
- High and Low temperature alarm Threshold
- Battery level feedback on each data communications
- Easy to install (magnet activation, LED feedback)
- Cloud codecs enabled
- Application reconfiguration Over The Air (measurement frequency, alarm thresholds,...)
- Class C: bidirectional communication
- Operating temperature: 0° to +55°C
- Fastening: plastic or polyamide screw, double-sided adhesive tape
- IP 30 (fully protected against dust, not protected against water intrusion)
- Manufacturer warranty: 1 year
This Senlab T is a smart LoRaWAN™ communicating device with a high precision temperature sensor, at ±0.1°C accuracy. The sensor showcases very high repeatability and stability, without requiring any calibration. The small form factor and discreet aesthetics of the Senlab T makes it well suited for offices or accommodations fitting. Sensing Labs devices are engineered with a very particular attention to the custom antenna design, bringing best of class performances to Senlab devices, both on the range and battery life. Battery is replaceable. Ready to be used on an LPWA Actility Network. All our devices are delivered with configuration. We will provide you a csv. file with commussionning keys.
| Partner Name | SENSING LABS |
|---|---|
| Vendor | Sensing Labs |
| Certification | CE, Orange LoRa®, RoHS, LoRaWAN Certified |
| Power supply | Non rechargeable battery |
| Battery specification (Wh) | Type - AA |
| RF power (dBm) | +14dB |
| Battery type | Lithium ion |
| Output throughput (mW) | 25 |
| Antenna | Integrated |
| RF transceiver | SX1272 |
| Other interfaces | Temperature |
| Band LoRaWAN MHZ | EU868 - Europe 863-870MHz |
| LoRa Class | Class A |
| Depth (cm) | 8.5 |
| Height (cm) | 5.3 |
| Width (cm) | 2.5 |
| Commercial status | Commercially available |
| Is available for sale | Yes |
Sensing Labs AD
Sensing Labs offers long-range and low power wireless sensors. It addresses B2B markets in the energy efficiency sector: connected buildings, smart energy metering (water, gas, electricity), irrigation control, predictive maintenance...
Senlab sensors combine hardware, software and firmware. The integration of sensors on IoT platforms is easy and fast.
SENLAB's LoRaWAN communicating sensors offer an optimal solution for data retrieval in a variety of environmental conditions (internal, external or harsh). SENLAB sensors are compatible with all public or private LoRaWAN networks. Sensing Labs' tools and services make it easy to use and configure the sensors.
IoT devices designed by Sensing Labs:
- Senlab M (gas and water),
- Senlab Led (electricity), Senlab T (temperature),
- Senlab A (4-20 Ma),
- Senlab PIR (Passage or Presence Detector),
- Senlab T & H (temperature and humidity),
- Senlab D (all or nothing),
- Gateways (Senlab Pico Gateway or Multitech)
All sensors have a range of 15 km of free field and a life span of up to 20 years with a communication every 10 minutes including the last 24 acquired data.