NKE Pulse Sens'O Waterproof IP68 50-70-039
Use smart meter radio module for optimizing electricity consumption via the remote reading of any type of pulse (water, gas, electricity, energy). All sensors fitted with pulse outputs can therefore be connected to the Pulse Sens’o. The Pulse Sens’o can manage up to 3 pulse output sensors.
- Smart Agriculture
- Smart Industry
- Smart City
- Smart Building
- Liquid level monitoring
- Water/Gas metering
- Work site productivity optimization
- Distribution fault detector
IMPORTANT: This product support ABP configuration only
- LoRaWAN Class A device Easy to use and deploy
- Up to 3 pulse inputs
- Data compression for batch report
- IP68 casing Waterproof
- Up to 12 years of autonomy
- Can be integrated quickly and cost-effectively into a LoRaWAN network without expensive and time-consuming cabling
The Class A LoRaWAN Pulse Sens’O from nke Watteco is long-range, low power consumption, high performance, and high-quality wireless up or down pulse sensor transmitting data from water, gas, electricity & energy meters.
The Pulse Sens’O operates with any commercial meter products and provides a connection to any wireless network using the LoRaWAN protocol. Three meters can be supported by a single LoRaWAN Pulse Sens’O allowing a significant reduction of installation and deployment costs. The measured parameters can be locally stored, concatenated, and compressed. This unique batch mechanism significantly reduces the amount of data transmission for demanding applications and drastically increases autonomy. Powered through a 3Lithium battery, it allows autonomy up to 12 years when transmitting data one time per day.
The Pulse Sens'O contains a Human Machine Interface, which includes three leads on the device:
- ASS: green flashing light until the association to a network is done.
- FNC: orange flashing light each minute while input is activated.
- CNF: red flashing light while in configuration mode.
The Pulse Sens'O device is a sleepy Class A device. It executes 'Binary Input' clusters, linked to their Inputs.
All NKE sensors apply a powerful ZigBee-like application layer which permits for configurable change of value (CoV) reporting of all attributes, depending on value change threshold and minimum and maximum reporting intervals. The binary format of the NKE ZCL-like application layer implements many of the clusters of the ZigBee Cluster Library. In addition, all NKE sensors support “batch reporting”: a powerful data-series compression feature in the sensor which decreases the amount of data transferred and related energy consumption by typically over 95%. NKE sensors also implement a listen-before-talk feature which is useful when doing dense sensor deployments.
| Partner Name | nke Watteco |
|---|---|
| Vendor | Actility |
| LoRa Alliance certified | Yes |
| Datasheet URL | |
| Certification | LoRa® Alliance, RoHS |
| Antenna | Integrated |
| RF transceiver | SX1272 |
| Interfaces | 4-20mA |
| Operating Temperature (min to max) | -20°C to +50°C |
| Band LoRaWAN MHZ | EU868 - Europe 863-870MHz |
| LoRa Class | Class A |
| Depth (cm) | 14 |
| Height (cm) | 5.5 |
| Width (cm) | 8.2 |
| Commercial status | Commercially available |
| Is available for sale | Yes |
nke Watteco
nke WATTECO is a French company specialising in the capture of physical quantities and environmental data related to the industry, buildings, transport, and in the wireless transmission of this information over long-range, low bit rate, low power radiofrequency networks (LPWAN) such as private or public LoRaWAN and SigFox, IoT networks (Internet of connected objects).